aaa authentication login mschapv2 enable
To enable Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAP V2) authentication
at login, use the aaa authentication login mschapv2 enable command. To revert to the default, use the no
form of this command.
aaa authentication login mschapv2 enable
no aaa authentication login mschapv2 enable
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
You cannot enable both MSCHAP V2 and CHAP or MSCHAP on your Cisco NX-OS device.
This command does not require a license.
Examples
This example shows how to enable MSCHAP V2 authentication:
switch# configure terminal
switch(config)# aaa authentication login mschapv2 enable
This example shows how to disable MSCHAP V2 authentication:
switch# configure terminal
switch(config)# no aaa authentication login mschapv2 enable
Related Commands
DescriptionCommand
Displays the status of MSCHAP V2 authentication.show aaa authentication login mschapv2
Cisco Nexus 7000 Series Security Command Reference
34
A Commands
aaa authentication login mschapv2 enable
To Next Page
Loading...
