Cisco Nexus 7000 Series - Clear Ldap-Server Statistics

clear ldap-server statistics
To clear the Lightweight Directory Access Protocol (LDAP) server statistics, use the clear ldap-server
statistics command.
clear ldap-server statistics {ipv4-address| ipv6-address| host-name}
Syntax Description
Server IPv4 address in the A.B.C.D format.ipv4-address
Server IPv6 address in the X:X:X:X format.ipv6-address
Server name. The name is alphanumeric, case
sensitive, and has a maximum of 256 characters.
host-name
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear the statistics for an LDAP server:
switch# clear ldap-server statistics 10.10.1.1
Related Commands
DescriptionCommand
Enables LDAP.feature ldap
Specifies the IPv4 or IPv6 address or hostname for
an LDAP server.
ldap-server host
Displays the LDAP server statistics.show ldap-server statistics
Cisco Nexus 7000 Series Security Command Reference
72
C Commands
clear ldap-server statistics