Cisco Nexus 7000 Series - Encryption Re-Encrypt Obfuscated

encryption re-encrypt obfuscated
To convert the existing obfuscated passwords to type-6 encrypted passwords, use the encryption re-encrypt
obfuscated command.
encryption re-encrypt obfuscated
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.2(1)
Usage Guidelines
When you use the encryption re-encrypt obfuscated command, the encrypted secrets such as, plain or
weakly-encrypted passwords, are converted to type-6 encryption if the encryption service is enabled with a
master key.
This command does not require a license.
Examples
This example shows how to convert the existing obfuscated passwords to type-6 encrypted passwords:
switch # encryption re-encrypt obfuscated
Related Commands
DescriptionCommand
Converts type6 encrypted passwords back to their
original state.
encryption decrypt type6
Cisco Nexus 7000 Series Security Command Reference
292
E Commands
encryption re-encrypt obfuscated