aaa accounting default
To configure authentication, authorization, and accounting (AAA) methods for accounting, use the aaa
accounting default command. To revert to the default, use the no form of this command.
aaa accounting default {group group-list| local}
no aaa accounting default {group group-list| local}
Syntax Description
Specifies to use a server group for accounting.group
Space-separated list of server groups that can include
the following:
•
radius for all configured RADIUS servers.
•
Any configured RADIUS or TACACS+ server
group name.
The maximum number of names in the list is eight.
group-list
Specifies to use the local database for accounting.local
Command Default
local
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
The group group-list methods refer to a set of previously defined servers. Use the radius-server host and
tacacs-server host commands to configure the host servers. Use the aaa group server command to create a
named group of servers.
Use the show aaa groups command to display the RADIUS server groups on the device.
If you specify the group method, the local method, or both, and they fail, then the accounting authentication
fails.
If you specify more that one server group, the Cisco NX-OS software checks each group in the order that you
specify in the list.
This command does not require a license.
Cisco Nexus 7000 Series Security Command Reference
15
A Commands
aaa accounting default
To Next Page
Loading...
