Cisco Nexus 7000 Series - Radius Commit

radius commit
To apply the pending configuration pertaining to the RADIUS Cisco Fabric Services (CFS) distribution session
in progress in the fabric, use the radius commit command.
radius commit
Syntax Description
This command has no other arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
Before committing the RADIUS configuration to the fabric, all switches in the fabric must have distribution
enabled using the radius distribute command.
CFS does not distribute the RADIUS server group configurations, periodic RADIUS server testing
configurations, or server and global keys. The keys are unique to the Cisco NX-OS device and are not shared
with other Cisco NX-OS devices.
This command does not require a license.
Examples
This example shows how to initiate distribution of a RADIUS configuration to the switches in the fabric:
switch# configure terminal
switch(config)# radius commit
Related Commands
DescriptionCommand
Enables Cisco Fabric Services distribution for
RADIUS.
radius distribute
Displays the RADIUS Cisco Fabric Services
distribution status and other details.
show radius
Cisco Nexus 7000 Series Security Command Reference
599
R Commands
radius commit