Cisco Nexus 7000 Series - Policy-Map Type Control-Plane

policy-map type control-plane
To create or specify a control plane policy map and enter policy map configuration mode, use the policy-map
type control-plane command. To delete a control plane policy map, use the no form of this command.
policy-map type control-plane policy-map-name
no policy-map type control-plane policy-map-name
Syntax Description
Name of the class map. The name is alphanumeric,
case sensitive, and has a maximum of 64 characters.
policy-map-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You can use this command only in the default VDC.
This command does not require a license.
Examples
This example shows how to specify a control plane policy map and enter policy map configuration mode:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)#
This example shows how to delete a control plane policy map:
switch# configure terminal
switch(config)# no policy-map type control-plane PolicyMapA
Related Commands
DescriptionCommand
Displays configuration information for control plane
policy maps.
show policy-map type control-plane
Cisco Nexus 7000 Series Security Command Reference
592
P Commands
policy-map type control-plane