Cisco Nexus 7000 Series - Show Running-Config Ldap

show running-config ldap
To display Lightweight Directory Access Protocol (LDAP) server information in the running configuration,
use the show running-config ldap command.
show running-config ldap [all]
Syntax Description
(Optional) Displays default LDAP configuration
information.
all
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples
This example shows how to display LDAP information in the running configuration:
switch# show running-config ldap
Related Commands
DescriptionCommand
Displays LDAP information.show ldap-server
Cisco Nexus 7000 Series Security Command Reference
887
Show Commands
show running-config ldap