Cisco Nexus 7000 Series - Tacacs+ Commit

tacacs+ commit
To apply the pending configuration pertaining to the TACACS+ Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the tacacs+ commit command.
tacacs+ commit
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
To use this command, TACACS+ must be enabled using the feature tacacs+ command.
Before committing the TACACS+ configuration to the fabric, all switches in the fabric must have distribution
enabled using the tacacs+ distribute command.
CFS does not distribute the TACACS+ server group configurations, periodic TACACS+ server testing
configurations, or server and global keys. The keys are unique to the Cisco NX-OS device and are not shared
with other Cisco NX-OS devices.
This command does not require a license.
Examples
This example shows how to apply a TACACS+ configuration to the switches in the fabric.
switch# configure terminal
switch(config)# tacacs+ commit
Related Commands
DescriptionCommand
Enables TACACS+.feature tacacs+
Displays TACACS+ CFS distribution status and other
details.
show tacacs+
Enables CFS distribution for TACACS+.tacacs+ distribute
Cisco Nexus 7000 Series Security Command Reference
939
T Commands
tacacs+ commit