Cisco Nexus 7000 Series - Cts Sxp Default Password

cts sxp default password
To configure the default Security Group Tag (SGT) Exchange Protocol (SXP) password for the device, use
the cts sxp default password command. To remove the default, use the no form of this command.
cts sxp default password {password| 7 encrypted-password}
no cts sxp default password
Syntax Description
Clear text password. The password is alphanumeric
and case-sensitive. The maximum length is 32
characters.
password
Specifies an encrypted password. The maximum
length is 32 characters.
7 encrypted password
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
Added the 7 option to allow encrypted passwords.4.1(3)
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to configure the default SXP password for the device:
switch# configure terminal
switch(config)# cts sxp default password Cisco654
This example shows how to remove the default SXP password:
switch# configure terminal
switch(config)# no cts sxp default password
Cisco Nexus 7000 Series Security Command Reference
176
C Commands
cts sxp default password