Cisco Nexus 7000 Series - Clear Ip Arp Inspection Log

clear ip arp inspection log
To clear the Dynamic ARP Inspection (DAI) logging buffer, use the clear ip arp inspection log command.
clear ip arp inspection log
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear the DAI logging buffer:
switch# clear ip arp inspection log
switch#
Related Commands
DescriptionCommand
Configures the DAI logging buffer size.ip arp inspection log-buffer
Displays the DAI configuration status.show ip arp inspection
Displays the DAI log configuration.show ip arp inspection log
Displays the DAI statistics.show ip arp inspection statistics
Cisco Nexus 7000 Series Security Command Reference
84
C Commands
clear ip arp inspection log