show running-config radius
To display RADIUS server information in the running configuration, use the show running-config radius
command.
show running-config radius [all]
Syntax Description
(Optional) Displays default RADIUS configuration
information.
all
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information for RADIUS in the running configuration:
switch# show running-config radius
Related Commands
DescriptionCommand
Displays RADIUS information.show radius-server
Cisco Nexus 7000 Series Security Command Reference
889
Show Commands
show running-config radius
To Next Page
Loading...
