show crypto ca trustpoints
To display trustpoint configurations, use the show crypto ca trustpoints command.
show crypto ca trustpoints
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display configured trustpoints:
switch# show crypto ca trustpoints
trustpoint: CAname; key:
revokation methods: crl
Related Commands
DescriptionCommand
Authenticates the certificate of the CA.crypto ca authenticate
Declares the trustpoint certificate authority that the
device should trust.
crypto ca trustpoint
Displays configured trustpoint certificates.show crypto ca certificates
Cisco Nexus 7000 Series Security Command Reference
728
Show Commands
show crypto ca trustpoints
To Next Page
Loading...
