Cisco Nexus 7000 Series - Show Radius

show radius
To display the RADIUS Cisco Fabric Services (CFS) distribution status and other details, use the show radius
command.
show radius {distribution status| merge status| pending [cmds]| pending-diff| session status| status}
Syntax Description
Displays the status of the RADIUS CFS distribution.distribution status
Displays the status of a RADIUS merge.merge status
Displays the pending configuration that is not yet
applied to the running configuration.
pending
(Optional) Displays the commands for the pending
configuration.
cmds
Displays the difference between the active
configuration and the pending configuration.
pending-diff
Displays the status of the RADIUS CFS session.session status
Displays the status of the RADIUS CFS.status
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the RADIUS CFS distribution status:
switch# show radius distribution status
distribution : enabled
session ongoing: no
session db: does not exist
merge protocol status: not yet initiated after enable
Cisco Nexus 7000 Series Security Command Reference
858
Show Commands
show radius