Cisco Nexus 7000 Series - Terminal Verify-Only

terminal verify-only
To enable command authorization verification on the command-line interface (CLI), use the terminal
verify-only command. To disable this feature, use the no form of this command.
terminal verify-only [username username]
terminal no verify-only [username username]
Syntax Description
(Optional) Specifies the username for which to verify
command authorization.
username username
Command Default
Disabled
The default for the username keyword is the current user session.
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.2(1)
Usage Guidelines
When you enable command authorization verification, the CLI indicates if the command is successfully
authorized for the user but does not execute the command.
The command authorization verification uses the methods configured in the aaa authorization commands
default command and the aaa authorization config-commands default command.
This command does not require a license.
Examples
This example shows how to enable command authorization verification:
switch# terminal verify-only
This example shows how to disable command authorization verification:
switch# terminal no verify-only
Related Commands
DescriptionCommand
Configures authorization for EXEC commands.aaa authorization commands default
Cisco Nexus 7000 Series Security Command Reference
958
T Commands
terminal verify-only