show cts
To display the global Cisco TrustSec configuration, use the show cts command.
show cts
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec global configuration:
switch# show cts
CTS Global Configuration
==============================
CTS support : enabled
CTS device identity : Device1
CTS caching support : disabled
Number of CTS interfaces in
DOT1X mode : 0
Manual mode : 0
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
732
Show Commands
show cts
To Next Page
Loading...
