Cisco Nexus 7000 Series - Show Cts Role-Based Access-List

show cts role-based access-list
To display the global Cisco TrustSec security group access control list (SGACL) configuration, use the show
cts role-based access-list command.
show cts role-based access-list [ list-name ]
Syntax Description
(Optional) SGACL name.
list-name
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
Added list name argument.4.2(1)
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec SGACL configuration:
switch# show cts role-based access-list
rbacl:test-3
deny ip
rbacl:test-1
deny ip
deny icmp
deny tcp src eq 1000 dest eq 2000
deny udp src range 1000 2000
rbacl:test-2
permit icmp
permit igmp
permit tcp src lt 2000
permit udp dest gt 4000
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
744
Show Commands
show cts role-based access-list