Cisco Nexus 7000 Series - Cts Refresh Role-Based-Policy

cts refresh role-based-policy
To refresh the Cisco TrustSec security group access control list (SGACL) policies downloaded from the Cisco
Secure ACS, use the cts refresh role-based-policy command.
cts refresh role-based-policy
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to enter Cisco TrustSec manual configuration mode for an interface:
switch# cts refresh role-based-policy
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays Cisco TrustSec SGACL policy
configuration.
show cts role-based policy
Cisco Nexus 7000 Series Security Command Reference
157
C Commands
cts refresh role-based-policy