Cisco Nexus 7000 Series - Clear Ip Dhcp Snooping Binding

clear ip dhcp snooping binding
To clear the DHCP snooping binding database, use the clear ip dhcp snooping binding command.
clear ip dhcp snooping binding
clear ip dhcp snooping binding [vlan vlan-id mac mac-address ip ip-address interface ethernet slot /
port [. subinterface-number]]
clear ip dhcp snooping binding [vlan vlan-id mac mac-address ip ip-address interface port-channel
channel-number [. subchannel-number]]
Syntax Description
(Optional) Clears the DHCP snooping binding
database for an entry identified with the VLAN ID
specified by the vlan-id argument and the additional
keywords and arguments that follow.
vlan vlan-id
Specifies the MAC address of the binding database
entry to be cleared. Enter the mac-address argument
in dotted hexadecimal format.
mac-address mac-address
Specifies the IPv4 address of the binding database
entry to be cleared. Enter the ip-address argument in
dotted decimal format.
ip ip-address
(Optional) Specifies the Ethernet interface of the
binding database entry to be cleared.
interface ethernet slot/port
(Optional) Number of the Ethernet-interface
subinterface.
The dot separator is required between the
port and subinterface-number arguments.
Note
.subinterface-number
(Optional) Specifies the Ethernet port-channel of the
binding database entry to be cleared.
interface port-channel channel-number
(Optional) Number of the Ethernet port-channel
subchannel.
The dot separator is required between the
channel-number and subchannel-number
arguments.
Note
.subchannel-number
Command Default
None
Command Modes
Any command mode
Cisco Nexus 7000 Series Security Command Reference
92
C Commands
clear ip dhcp snooping binding