Cisco Nexus 7000 Series - Show Cts Role-Based Sgt Vlan

show cts role-based sgt vlan
To display the Cisco TrustSec Security Group Tag (SGT) mapping configuration for a specific VLAN, use
the show cts role-based sgt vlan command.
show cts role-based sgt vlan {all| vlan-id}
Syntax Description
Displays the configured SGT for all VLANs.all
Configured SGT for the specific VLAN. The range
is from 1 to 4094.
vlan-id
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.6.2(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command does not require a license.
Examples
This example shows how to display the Cisco TrustSec SGT mapping configuration for all VLANs:
switch# show cts role-based sgt vlan all
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the global Cisco TrustSec SGT mapping
configuration.
show cts role-based sgt-map
Configures mapping of Cisco TrustSec SGTs to an
SGACL.
cts role-based sgt
Cisco Nexus 7000 Series Security Command Reference
751
Show Commands
show cts role-based sgt vlan