Cisco Nexus 7000 Series - Service Dhcp

service dhcp
To enable the DHCP relay agent, use the service dhcp command. To disable the DHCP relay agent, use the
no form of this command.
service dhcp
no service dhcp
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was deprecated and replaced with the ip dhcp relay
command.
4.2(1)
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to globally enable DHCP snooping:
switch# configure terminal
switch(config)# service dhcp
switch(config)#
Related Commands
DescriptionCommand
Enables the DHCP snooping feature on the device.feature dhcp
Configures an IP address of a DHCP server on an
interface.
ip dhcp relay address
Enables the insertion and removal of option-82
information from DHCP packets.
ip dhcp relay information option
Globally enables DHCP snooping on the device.ip dhcp snooping
Displays general information about DHCP snooping.show ip dhcp snooping
Cisco Nexus 7000 Series Security Command Reference
650
S Commands
service dhcp