Cisco Nexus 7000 Series - Show Ipv6 Neighbor Binding

show ipv6 neighbor binding
To display contents of a binding table, use the show ipv6 neighbor binding command.
show ipv6 neighbor binding[vlanvlan-id| interfacetype number| ipv6ipv6-address| macmac-address]
Syntax Description
(Optional) Displays the binding table entries that
match the specified VLAN.
vlan vlan-id
(Optional) Displays the binding table entries that
match the specified interface type and number.
interface type number
(Optional) Displays the binding table entries that
match the specified IPv6 address.
ipv6 ipv6-address
(Optional) Displays the binding table entries that
match the specified Media Access Control (MAC)
address.
mac mac-address
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.8.0(1)
Usage Guidelines
This command displays the contents of the binding table. The display output can be specified by the specified
VLAN, interface, IPv6 address, or MAC address. If no keywords or arguments are entered, all binding table
contents are displayed.
Examples
The following example displays the contents of a binding table:
switch# show ipv6 neighbor binding
address DB has 4 entries
Codes: L - Local, S - Static, ND - Neighbor Discovery
Preflevel (prlvl) values:
1:Not secure 2:MAC and LLA match 3:Cga authenticated
4:Dhcp assigned 5:Cert authenticated 6:Cga and Cert auth
7:Trusted port 8:Statically assigned
IPv6 address Link-Layer addr Interface vlan prlvl age state Time left
ND FE80::A8BB:CCFF:FE01:F500 AABB.CC01.F500 Et0/0 100 0002 0 REACHABLE 8850
L FE80::21D:71FF:FE99:4900 001D.7199.4900 Vl100 100 0080 7203 DOWN N/A
ND 2001:600::1 AABB.CC01.F500 Et0/0 100 0003 0 REACHABLE 3181
ND 2001:300::1 AABB.CC01.F500 Et0/0 100 0007 0 REACHABLE 9559
ND 2001:100::2 AABB.CC01.F600 Et1/0 200 0002 0 REACHABLE 9196
Cisco Nexus 7000 Series Security Command Reference
819
Show Commands
show ipv6 neighbor binding