Cisco Nexus 7000 Series - Show Cli Syntax Roles Network-Operator

show cli syntax roles network-operator
To display the syntax of the commands that the network-operator role can use but the vdc-operator role cannot,
use the show cli syntax roles network-operator command.
show cli syntax roles network-operator
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the syntax of the commands that the network-operator role can use but
the vdc-operator role cannot:
switch# show cli syntax roles network-operator
MODE exec
(0) show debug license
(1) show debug cmpproxy
(2) show debug exceptionlog
(3) show debug device_test
(4) show debug diagmgr
(5) show debug diagclient
(6) show debug ntp
(7) show debug port_lb
(8) show debug copp
(9) show license usage vdc-all [ { detail | <license-feature> } ]
(10) show system internal license event-history
(11) show system internal license mem-stats [ detail ]
(12) show system internal loader configuration
(13) show system internal bootvar log
(14) show system internal cmpproxy install-logs
(15) show system internal cmpproxy [ event-history ] errors
(16) show system internal cmpproxy [ event-history ] msgs
(17) show system internal cmpproxy mem-stats [ detail ]
(18) show system internal epld logging
(19) show system internal access-list status [ ]
(20) show system internal copp ppf-database { policy { subscriptions | sessions
| instances | all } }
(21) show system internal copp [ event-history ] errors
--More--
Cisco Nexus 7000 Series Security Command Reference
715
Show Commands
show cli syntax roles network-operator