Cisco Nexus 7000 Series - Password Secure-Mode

password secure-mode
To enable secure mode for password changing, use the password secure-mode command. To disable the
secure mode for password changing, use the no form of this command.
password secure-mode
no password secure-mode
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.6.1.4
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable secure mode for changing password:
switch# configure terminal
switch(config)# password secure-mode
This example shows how to disable secure mode for changing password:
switch# configure terminal
switch(config)# no password secure-mode
Related Commands
DescriptionCommand
Enables password-strength checking.show password strength-check
Cisco Nexus 7000 Series Security Command Reference
528
P Commands
password secure-mode