encryption decrypt type6
To convert type-6 encrypted passwords back to their original state, use the encryption decrypt type6 command.
encryption decrypt type6
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to convert type6 encrypted passwords back to their original state:
switch # encryption decrypt type6
Please enter current Master Key:
Related Commands
DescriptionCommand
Converts the existing obfuscated passwords to type6
encrypted passwords.
encryption re-encrypt obfuscated
Configures the master key for the type-6 encryption.key config-key
Cisco Nexus 7000 Series Security Command Reference
282
E Commands
encryption decrypt type6
To Next Page
Loading...
