Cisco Nexus 7000 Series - Page 307

switch(config-if-cts-dot1x)# no encrypt pause-frame
switch(config-if-cts-dot1x)exit
switch(config-if)# shutdown
switch(config-if)# no shutdown
switch(config-if)# exit
switch(config)#
Related Commands
DescriptionCommand
Enables Cisco TrustSec authentication on an interface
and enters Cisco TrustSec 802.1X configuration
mode.
cts dot1x
Enters Cisco TrustSec manual configuration mode
for an interface.
cts manual
Displays the Cisco TrustSec configuration information
for interfaces.
show cts interface
Cisco Nexus 7000 Series Security Command Reference
281
E Commands
encrypt pause-frame