Cisco Nexus 7000 Series - Role Commit

role commit
To apply the pending configuration pertaining to the user role Cisco Fabric Services distribution session in
progress in the fabric, use the role commit command.
role commit
Syntax Description
This command has no other arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
Before committing the user role configuration to the fabric, all switches in the fabric must have distribution
enabled using the role distribute command.
This command does not require a license.
Examples
This example shows how to initiate distribution of a user role configuration to the switches in the fabric:
switch# configure terminal
switch(config)# role commit
Related Commands
DescriptionCommand
Enables Cisco Fabric Services distribution for user
roles.
role distribute
Displays the user role Cisco Fabric Services
distribution status and other details.
show role
Cisco Nexus 7000 Series Security Command Reference
626
R Commands
role commit