Cisco Nexus 7000 Series - Aaa Group Server Radius

aaa group server radius
To create a RADIUS server group and enter RADIUS server group configuration mode , use the aaa group
server radius command. To delete a RADIUS server group, use the no form of this command.
aaa group server radius group-name
no aaa group server radius group-name
Syntax Description
RADIUS server group name.The name is
alphanumeric and case-sensitive. The maximum
length is 64 characters.
group-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to create a RADIUS server group and enter RADIUS server configuration mode:
switch# configure terminal
switch(config)# aaa group server radius RadServer
switch(config-radius)#
This example shows how to delete a RADIUS server group:
switch# configure terminal
switch(config)# no aaa group server radius RadServer
Related Commands
DescriptionCommand
Displays server group information.show aaa groups
Cisco Nexus 7000 Series Security Command Reference
49
A Commands
aaa group server radius