EasyManuals Logo

Cisco Nexus 7000 Series Command Reference

Cisco Nexus 7000 Series
1018 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #358 background imageLoading...
Page #358 background image
feature scp-server
To configure a secure copy (SCP) server on the Cisco NX-OS device in order to copy files to and from a
remote device, use the feature scp-server command. To disable an SCP server, use the no form of this
command.
feature scp-server
no feature scp-server
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.5.1(1)
Usage Guidelines
After you enable the SCP server, you can execute an SCP command on the remote device to copy the files to
or from the Cisco NX-OS device.
The arcfour and blowfish cipher options are not supported for the SCP server.
This command does not require a license.
Examples
This example shows how to enable the SCP server on the Cisco NX-OS device:
switch# configure terminal
switch(config)# feature scp-server
switch(config)#
This example shows how to disable the SCP server on the Cisco NX-OS device:
switch# configure terminal
switch(config)# no feature scp-server
switch(config)#
Related Commands
DescriptionCommand
Enables the SFTP server on the Cisco NX-OS device.feature sftp-server
Cisco Nexus 7000 Series Security Command Reference
332
F Commands
feature scp-server

Table of Contents

Other manuals for Cisco Nexus 7000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Nexus 7000 Series and is the answer not in the manual?

Cisco Nexus 7000 Series Specifications

General IconGeneral
ChassisModular
Operating SystemCisco NX-OS
LatencySub-microsecond
IPv6 SupportYes
RedundancyPower supplies, fans, supervisors, fabric modules
Power SupplyAC or DC
Layer SupportL2, L3
Network ManagementCLI, SNMP
VirtualizationVRF, vPC
Ports10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported ModulesVarious (1G, 10G, 40G, 100G)
FeaturesFCoE, OTV, LISP
MPLS SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, Cisco TrustSec, Control Plane Policing (CoPP)
DimensionsVaries by model
WeightVaries by model
Operating Temperature0 to 40°C (32 to 104°F)
Storage Temperature-40°F to 158°F (-40°C to 70°C)
Humidity5 to 95% noncondensing
MTBFVaries by model
Number of SlotsVaries by model (9-slot, 10-slot, 18-slot)

Related product manuals