show radius-server
To display RADIUS server information, use the show radius-server command.
show radius-server [hostname| ipv4-address| ipv6-address] [directed-request| groups| sorted| statistics]
Syntax Description
(Optional) RADIUS server Domain Name Server
(DNS) name. The name is case sensitive.
hostname
(Optional) RADIUS server IPv4 address in the
A.B.C.D format.
ipv4-address
(Optional) RADIUS server IPv6 address in the
X:X:X:X format.
ipv6-address
(Optional) Displays the directed request configuration.directed-request
(Optional) Displays information about the configured
RADIUS server groups.
groups
(Optional) Displays sorted-by-name information about
the RADIUS servers.
sorted
(Optional) Displays RADIUS statistics for the
RADIUS servers.
statistics
Command Default
Displays the global RADIUS server configuration
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
RADIUS preshared keys are not visible in the show radius-server command output. Use the show
running-config radius command to display the RADIUS preshared keys.
This command does not require a license.
Cisco Nexus 7000 Series Security Command Reference
860
Show Commands
show radius-server
To Next Page
Loading...
