Cisco Nexus 7000 Series - Show Macsec Policy

show macsec policy
To display the details of the MACsec policies, use the show macsec policy command.
show macsec policy [ policy-name ]
Syntax Description
(Optional) Name of the MACsec policy.
policy-name
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.8.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the details of all the MACsec policies:
switch# show macsec policy
MACsec Policy Cipher Pri Window Offset Security SAK
Rekey time
-------------------------------- ---------------- ---- -------- -------- ------------
--------------
p1 GCM-AES-XPN-128 9 0 0 must-secure 60
system-default-macsec-policy GCM-AES-XPN-256 16 0 0 must-secure
pn-exhaust
This example shows how to display the details of the user-defined MACsec policy:
switch# show macsec policy p1
MACsec Policy Cipher Pri Window Offset Security SAK
Rekey time
-------------------------------- ---------------- ---- -------- -------- ------------
--------------
p1 GCM-AES-XPN-128 9 0 0 must-secure 60
Related Commands
DescriptionCommand
Configures the cipher suite for encrypting traffic with
MACsec.
cipher suite
Cisco Nexus 7000 Series Security Command Reference
842
Show Commands
show macsec policy