ipv6 dhcp-ldra
To enable the Lightweight DHCPv6 Relay Agent (LDRA) feature, use the ipv6 dhcp-ldra command.
ipv6 dhcp-ldra
no ipv6 dhcp-ldra
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the DHCP feature by using the feature dhcp command.
Examples
This example shows how to enable the LDRA feature:
switch# configure terminal
switch(config)# feature dhcp
switch(config)# ipv6 dhcp-ldra
This example shows how to disable the LDRA feature:
switch(config)# no ipv6 dhcp-ldra
Related Commands
DescriptionCommand
Displays the configuration details of LDRA.show ipv6 dhcp-ldra
Cisco Nexus 7000 Series Security Command Reference
438
I Commands
ipv6 dhcp-ldra
To Next Page
Loading...
