show system internal access-list feature bank-class map
To display the access control list (ACL) ternary content addressable memory (TCAM) bank mapping feature
group and class combination tables, use the show system internal access-list feature bank-class map command.
show system internal access-list feature bank-class map {ingress| egress} [module module]
Syntax Description
Displays feature class information for ingress
modules.
ingress
Displays feature class information for egress modules.egress
(Optional) Displays the module. The range is from 1
to 18.
modulemodule
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.6.2(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the feature group and class combination tables for ingress module 4:
switch(config)# show system internal access-list feature bank-class map ingress module 4
Feature Class Definition:
0. CLASS_QOS :
QoS,
1. CLASS_INBAND :
Tunnel Decap, SPM LISP, SPM ERSPAN (termination),
2. CLASS_PACL :
PACL, Netflow,
3. CLASS_DHCP :
DHCP, Netflow, ARP, VACL,
4. CLASS_RACL :
RACL, RACL_STAT, Netflow (SVI), ARP,
5. CLASS_VACL :
VACL, VACL_STAT, ARP, FEX, Netflow,
6. CLASS_RV_ACL :
RACL, PBR, BFD, ARP, SPM WCCP, VACL, SPM OTV, FEX, CTS
implicit Tunnel
Cisco Nexus 7000 Series Security Command Reference
912
Show Commands
show system internal access-list feature bank-class map
To Next Page
Loading...
