show startup-config eou
To display the Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) configuration
information in the startup configuration, use the show startup-config eou command.
show startup-config eou
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must enable the EAPoUDP feature by using the feature eou command before using this command.
This command does not require a license.
Examples
This example shows how to display the EAPoUDP information in the startup configuration:
switch# show startup-config eou
version 4.0(1)
Cisco Nexus 7000 Series Security Command Reference
904
Show Commands
show startup-config eou
To Next Page
Loading...
