Cisco Nexus 7000 Series - Show Ip Access-Lists Capture Session

show ip access-lists capture session
To display the ACL capture session configuration, use the show ip access-lists capture session command.
show ip access-lists capture session session
Syntax Description
Session ID. The range is from 0 to 4294967295.session
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the ACL capture session configuration:
switch# show ip access-lists capture session 5
switch#
Related Commands
DescriptionCommand
Configures an ACL capture session.
monitor session session type acl-capture
Configures a destination for ACL capture packets.destination interface
Cisco Nexus 7000 Series Security Command Reference
781
Show Commands
show ip access-lists capture session