show cts environment-data
To display the global Cisco TrustSec environment data, use the show cts environment-data command.
show cts environment-data
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
The Cisco NX-OS device downloads the Cisco TrustSec environment data from the ACS after you have
configured the Cisco TrustSec credentials for the device and configured authentication, authorization, and
accounting (AAA).
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec environment data:
switch# show cts environment-data
CTS Environment Data
==============================
Current State : CTS_ENV_DNLD_ST_ENV_DOWNLOAD_DONE
Last Status : CTS_ENV_SUCCESS
Local Device SGT : 0x0002
Transport Type : CTS_ENV_TRANSPORT_DIRECT
Data loaded from cache : FALSE
Env Data Lifetime : 300 seconds after last update
Last Update Time : Sat Jan 5 16:29:52 2008
Server List : ACSServerList1
AID:74656d706f72617279 IP:10.64.65.95 Port:1812
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
736
Show Commands
show cts environment-data
To Next Page
Loading...
