Cisco Nexus 7000 Series - Show Ipv6 Dhcp-Ldra

show ipv6 dhcp-ldra
To display configuration details and statistics for the Lightweight DHCPv6 Relay Agent (LDRA), use the
show ipv6 dhcp-ldra command.
show ipv6 dhcp-ldra [statistics]
Syntax Description
(Optional) Displays LDRA-related statistics.statistics
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the LDRA feature by using the ipv6 dhcp-ldra command.
Examples
This example shows how to enable the LDRA feature on the specified interface:
switch(config)# ipv6 dhcp-ldra
switch(config)# show ipv6 dhcp-ldra statistics
DHCPv6 LDRA client facing statistics.
Messages received 2
Messages sent 2
Messages discarded 0
Messages Received
SOLICIT 1
REQUEST 1
Messages Sent
RELAY-FORWARD 2
DHCPv6 LDRA server facing statistics.
Messages received 2
Messages sent 2
Messages discarded 0
Messages Received
RELAY-REPLY 2
Messages Sent
ADVERTISE 1
REPLY 1
Related Commands
DescriptionCommand
Enables the LDRA feature.ipv6 dhcp-ldra
Cisco Nexus 7000 Series Security Command Reference
814
Show Commands
show ipv6 dhcp-ldra