Cisco Nexus 7000 Series - Cts Refresh Environment-Data

cts refresh environment-data
To refresh the Cisco TrustSec environment data downloaded from the AAA server, use the cts refresh
environment-data command.
cts refresh environment-data
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
ModificationRelease
This command was introduced.6.2(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
Ensure that you are using the Cisco Identity Services Engine (ISE) Release 1.0 or later releases.
Examples
This example shows how to refresh the Cisco TrustSec environment data downloaded from the AAA server:
switch# cts refresh environment-data
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the Cisco TrustSec environment data.show cts environment-data
Cisco Nexus 7000 Series Security Command Reference
156
C Commands
cts refresh environment-data