Cisco Nexus 7000 Series - Cts Role-Based Detailed-Logging

cts role-based detailed-logging
To enable the displaying of ACE-Action details for the RBACL policies, use the cts role-based
detailed-logging command. To revert to the default, use the no form of this command.
cts role-based detailed-logging
no cts role-based detailed-logging
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configurationVRF configuration
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
To view the detailed ACLLOGS, you need to enable logging ip access-list detailed after enabling cts
role-based detailed logging.
Note
Examples
This example shows how to configure RBACL ace level permission and monitor logging:
switch# configure terminal
switch(config)# cts role-based detailed-logging
This example shows how to disable RBACL ace level permission and monitor logging:
switch# configure terminal
switch(config)# no
cts role-based detailed-logging
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the Cisco TrustSec SGACL policy
enforcement configuration.
show cts role-based enable
Cisco Nexus 7000 Series Security Command Reference
163
C Commands
cts role-based detailed-logging