show encryption service stat
To display the status of the encryption service, use the show encryption service stat command.
show encryption service stat
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the status of the encryption service:
switch# show encryption service stat
Encryption service is enabled
Master Encryption Key is configured.
Type-6 encryption is being used
switch#
Related Commands
DescriptionCommand
Displays the configuration for a specific keychain.show key chain
Cisco Nexus 7000 Series Security Command Reference
765
Show Commands
show encryption service stat
To Next Page
Loading...
