Cisco Nexus 7000 Series - Feature Tacacs

feature tacacs+
To enable TACACS+, use the feature tacacs+ command. To disable TACACS+, use the no form of this
command.
feature tacacs+
no feature tacacs+
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must use the feature tacacs+ command before you configure TACACS+.
When you disable TACACS+, the Cisco NX-OS software removes the TACACS+ configuration.Note
This command does not require a license.
Examples
This example shows how to enable TACACS+:
switch# configure terminal
switch(config)# feature tacacs+
This example shows how to disable TACACS+:
switch# configure terminal
switch(config)# no feature tacacs+
Related Commands
DescriptionCommand
Displays TACACS+ information.show tacacs+
Cisco Nexus 7000 Series Security Command Reference
335
F Commands
feature tacacs+