Cisco Nexus 7000 Series - Cts Device-ID

cts device-id
To configure a Cisco TrustSec device identifier, use the cts device-id command.
cts device-id device-id password [7] password
Syntax Description
Cisco TrustSec device identifier name. The name is
alphanumeric and case-sensitive. The maximum
length is 32 characters.
device-id
(Optional) Encrypts the password.7
Specifies the password to use during EAP-FAST
processing. The name is alphanumeric and
case-sensitive. The maximum length is 32 characters.
password password
Command Default
No Cisco TrustSec device identifier
Clear text password
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
The Cisco TrustSec device identifier name must be unique in your Cisco TrustSec network cloud.
This command requires the Advanced Services license.
Examples
This example shows how to configure a Cisco TrustSec device identifier:
switch# configure terminal
swtich(config)# cts device-id DeviceA password Cisco321
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
143
C Commands
cts device-id