Cisco Nexus 7000 Series Command Reference

cts sgt
To configure the security group tag (SGT) for Cisco TrustSec, use the cts sgt command.
cts sgt tag
Syntax Description
Local SGT for the device that is a decimal value or
a hexadecimal value with the format 0xhhhh . The
decimal range is from 2 to 65519, and the
hexadecimal range is from 0x0 to 0xffff.
tag
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
Modified the tag argument to accept decimal values.6.2(2)
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to configure the Cisco TrustSec SGT for the device:
switch# configure terminal
switch(config)# cts sgt 0x3
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the Cisco TrustSec environment data.show cts environment-data
Cisco Nexus 7000 Series Security Command Reference
147
C Commands
cts sgt

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)