Cisco Nexus 7000 Series - Show

show
To display information about which I/O modules are configured with the command, use the show command.
show
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.2(1)
Usage Guidelines
This command does not require a license.
If no I/O modules are configured with the command, the show command has no output.
Examples
This example shows how to display the I/O modules that are configured with the command:
switch# show
Module 1 enabled
Module 3 enabled
switch#
Cisco Nexus 7000 Series Security Command Reference
694
Show Commands
show