Cisco Nexus 7000 Series - Show Ip Device Tracking

show ip device tracking
To display IP device tracking information, use the show ip device tracking command.
show ip device tracking all| interface ethernet slot/port| ip-address ipv4-address| mac-address mac-address
Syntax Description
Displays all IP device tracking information.all
Displays IP tracking device information for an
interface.
interface ethernet slot/port
Displays IP tracking device information for an IPv4
address in the A.B.C.D format.
ip-addressipv4-address
Displays IP tracking information for a MAC address
in the XXXX.XXXX.XXXX format.
mac-addressmac-address
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display all IP device tracking information:
switch# show ip device tracking all
This example shows how to display the IP device tracking information for an interface:
switch# show ip device tracking ethernet 1/2
This example shows how to display the IP device tracking information for an IP address:
switch# show ip device tracking ip-address 10.10.1.1
This example shows how to display the IP device tracking information for a MAC address:
switch# show ip device tracking mac-address 0018.bad8.3fbd
Cisco Nexus 7000 Series Security Command Reference
791
Show Commands
show ip device tracking