Cisco Nexus 7000 Series - Show Dot1 X Interface Ethernet

show dot1x interface ethernet
To display the 802.1X feature status and configuration information for an Ethernet interface, use the show
dot1x interface ethernet command.
show dot1x interface ethernet slot/port [details| statistics| summary]
Syntax Description
Slot and port identifiers for the interface.
slot/port/
(Optional) Displays detailed 802.1X information for
the interface.
details
(Optional) Displays 802.1X statistics for the interface.statistics
(Optional) Displays a summary of the 802.1X
information for the interface.
summary
Command Default
Displays the interface 802.1X configuration
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must enable the 802.1X feature by using the feature dot1x command before using this command.
This command does not require a license.
Examples
This example shows how to display the 802.1X feature status and configuration information for an Ethernet
interface:
switch# show dot1x interface ethernet 2/1
Dot1x Info for Ethernet2/1
-----------------------------------
PAE = AUTHENTICATOR
PortControl = FORCE_AUTH
HostMode = SINGLE HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
Cisco Nexus 7000 Series Security Command Reference
763
Show Commands
show dot1x interface ethernet