crypto ca remote ldap crl-refresh-time
To configure the refresh time to update the certificate revocation list (CRL) from the remote cert-store, use
the crypto ca remote ldap crl-refresh-time command.
crypto ca remote ldap crl-refresh-time hours
Syntax Description
Refresh time value in hours. The range is from 0 to
744 hours. If you enter 0, the refresh routine runs
once.
hours
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
To use this command, you must configure a remote cert-store and the LDAP server group.
This command does not require a license.
Examples
This example shows how to configure the refresh time to update the CRL from the remote cert-store:
switch(config)# crypto ca remote ldap crl-refresh-time 10
Related Commands
DescriptionCommand
Specifies the cert-store to be used for certificate
authentication.
crypto ca lookup
Configures the LDAP server group to be used while
communicating with LDAP.
crypto ca remote ldap server-group
Cisco Nexus 7000 Series Security Command Reference
134
C Commands
crypto ca remote ldap crl-refresh-time
To Next Page
Loading...
