Cisco Nexus 7000 Series - Show Privilege

show privilege
To show the current privilege level, username, and status of cumulative privilege support, use the show
privilege command.
show privilege
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to use the show privilege command to view the current privilege level, username,
and status of cumulative privilege support:
switch# show privilege
User name: admin
Current privilege level: -1
Feature privilege: Enabled
switch#
Related Commands
DescriptionCommand
Enables a user to move to a higher privilege level.
enable level
Enables a secret password for a specific privilege
level.
enable secret priv-lvl
Enables the cumulative privilege of roles for
command authorization on TACACS+ servers.
feature privilege
Enables a user to use privilege levels for
authorization.
username username priv-lvl
Cisco Nexus 7000 Series Security Command Reference
857
Show Commands
show privilege