Cisco Nexus 7000 Series - Show Username

show username
To display the public key for the specified user, use the show username command.
show username username keypair
Syntax Description
Name of the user. You can enter up to 28
alphanumeric characters.
username
Displays the Secure Shell (SSH) user keys.keypair
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
This command does not require a license.
For security reasons, this command does not show the private key.
Examples
This example shows how to display the public key for the specified user:
switch# show username admin keypair
**************************************
rsa Keys generated:Mon Feb 15 08:10:45 2010
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA0+rIeMgXwv004lt/hwOoyqIKbFGl1tmkFNm/tozuazfL
4dH/asAXZoJePDdiO1ILBGfrQgzyS5u3prXuXfgnWkTu0/4WlD0DF/EPdsd3NNzNbpPFzNDVylPDyDfR
X5SfVICioEirjX9Y59DZP+Nng6rJD7Z/YHVXs/jRNLPBOIs=
bitcount:262144
fingerprint:
a4:a7:b1:d1:43:09:49:6f:7c:f8:60:62:8e:a2:c1:d1
**************************************
could not retrieve dsa key information
**************************************
switch#
Cisco Nexus 7000 Series Security Command Reference
928
Show Commands
show username