Cisco Nexus 7000 Series - Show Ldap-Server Groups

show ldap-server groups
To display the Lightweight Directory Access Protocol (LDAP) server group configuration, use the show
ldap-server groups command.
show ldap-server groups
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples
This example shows how to display the LDAP server group configuration:
switch# show ldap-server groups
total number of groups: 1
following LDAP server groups are configured:
group LDAPgroup1:
Use-vrf: default
Mode: UnSecure
Authentication: Search and Bind
Bind and Search : append with basedn (cn=$userid)
Authentication: Do bind instead of compare
Bind and Search : compare passwd attribute userPassword
Authentication Mech: Default(PLAIN)
Search map:
Related Commands
DescriptionCommand
Creates an LDAP server group and enters the LDAP
server group configuration mode for that group.
aaa group server ldap
Enables LDAP.feature ldap
Cisco Nexus 7000 Series Security Command Reference
833
Show Commands
show ldap-server groups