Cisco Nexus 7000 Series - Cts Sxp Mapping Network-Map

cts sxp mapping network-map
To expand the network limit, use the cts sxp mapping network-map command. To revert to the default, use
the no form of this command.
cts sxp mapping network-map num_bindings
no cts sxp mapping network-map num_bindings
Syntax Description
Number of bindings to be expanded. The range is
from 0 to 65535.
num_bindings
Command Default
Zero (0)
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature by using the feature cts command.
Examples
This example shows how to expand the network limit:
switch# configure terminal
switch(config)# cts sxp mapping network-map 64
This example shows how to disable the network limit:
switch# configure terminal
switch(config)# no cts sxp mapping network-map 64
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the Cisco TrustSec SXP configuration
information.
show cts sxp
Cisco Nexus 7000 Series Security Command Reference
182
C Commands
cts sxp mapping network-map